Marking the location of the control system balls in relation to the distribution plate
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install the balls in the housing. Use Volvo Genuine parts petroleum jelly (P/N 116 1151-40).
Identify where the balls are to be located. Press petroleum jelly into the relevant holes and position the balls (the petroleum jelly ensures that the balls stay in the housing). To mark the position of the balls in relation to the distribution plate, see Marking the location of the balls in relation to the distribution plate .