Information before removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
When replacing the valve housing, the distribution plate and all 6 balls (if undamaged) should be transferred to the new valve housing. There are many screws of different lengths. It is important that the different screws are not mixed up. Checks are carried out when replacing the valve housing.
The new valve housing does not have any solenoids installed. The solenoids are loose in the kit and must be installed separately.