Control system for cars of model year -2002

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Valve Housing And Pressure Sensor And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the following screws:

3 screws numbered 374 (64 mm)
3 screws numbered 375 (60 mm)
1 screw numbered 376 (30 mm). Retain the guide sleeve on the screw or in the valve housing
3 screws numbered 378 (55 mm)
1 screws numbered 379 (15 mm)
1 screws numbered 380 (10 mm)
1 screw numbered 384 (85 mm).

Leave the screws numbered 377 (45 mm) in position for the time being.