LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Transmission - Removal, Replacement And Installation - 2 Of 2) >> Transmission, Automatic (B6284T, 4T65EV-Gt; 1999-2001) >> Control system/valve housing, removing >> Checking the markings and location of the gaskets

Checking the markings and location of the gaskets

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Markings And Location Of Gaskets (1 Of 2)
GLL106540Courtesy of VOLVO CARS OF NORTH AMERICA.

The gaskets are marked C and V.

Gasket C is against the control system housing.

Gasket V is against the valve housing.

Fig 2: Identifying Markings And Location Of Gaskets (2 Of 2)
GLL109610Courtesy of VOLVO CARS OF NORTH AMERICA.

Distribution plate 

Remove the locking pin (368) (can be reused).

Lift up the distribution plate together with gasket C.

NOTE:

Do not damage the 2 small strainers on the distribution plate.

Lift out gasket V.

scientia non olet · About LEMON Manuals