Air vent housing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
The valve housing consists of:
- the valve housing (300)
Gaskets:
- 1 marked C (369)
- 1 marked V (371).
- distribution plate (370)
- guide sleeve (410).
There are six balls in the valve housing. 4 small (372) and 2 larger (373).
When separating the valve housing from the control system housing: The gaskets and plate must remain in the valve housing so that the balls do not fall out of their seats in the valve housing.
There are two small strainers (382) on the distribution plate.
2 plastic plugs (368) hold the gasket and plate in place.