Removing the screws from the torque converter
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove the 6 screws for the torque converter.
Turn the engine using a socket and ratchet. Pull out the right-hand wing liner slightly so that the crankshaft nut can be accessed more easily. Use a Torx TX50 socket on the torque converter screws.