Removing the gearbox mounting screws
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove the bracket with the connectors for the heated oxygen sensors (HO2S) and the clamp for the cable harness from the gearbox.
Remove:
- the screws for the clamp securing the cable harness at the rear edge of the engine
- the nut, 1, for the bracket to the cable harness and the coolant hose
- the bracket for the air cleaner (ACL) (only applies to B5254T4)
- the 3 screws for the gearbox and engine and the 2 screws for the starter motor.
Tie up the cable harness.