Removing bevel gear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Angle Gear Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Only applies to vehicles equipped with AWD.

Remove the angle gear screws, 5. Pull the angle gear straight out from the gearbox.

Hang the angle gear up in an oil pipe to the turbocharger or similar for example.

Fig 2: Identifying Angle Gear Hung Up In An Oil Pipe To The Turbocharger

Courtesy of VOLVO CARS OF NORTH AMERICA.