Tightening the sub-frame screws (both sides)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Tighten the screws on the left-hand side of the subframe first, followed by the right-hand side, as per Summary of specific components and tightening torques .
Use: 9512050 .
Tighten the screws, 4 x M10, to the sub-frame brackets.