LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Transmission - Removal, Replacement And Installation - 2 Of 2) >> Transmission, Automatic (B5254T2, Aw50/51 AWD; 2004-2006) >> Sealing ring, gear shift linkage rod, replacing >> Replacing the sealing ring for the gear shift linkage rod

Replacing the sealing ring for the gear shift linkage rod

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Removal Of Sealing Ring Using Small Rounded Off Screwdriver
GLL109335Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the old sealing ring. Use a small rounded off screwdriver.

Take care not to damage the rod.

Smear a little automatic transmission fluid on the new sealing ring. Install the ring. Use drift 9995476 .

scientia non olet · About LEMON Manuals