Installing the gear-shift position sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Gear-Shift Position Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten the sensor screws lightly.

Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection.

Tighten the nut.

Lock the nut with the lock washer.