Replacing the control system: Preparations

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Remove. See: Removing the control system cover .

Fig 1: Locating Oil Temperature Sensor And Holder Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the connectors for the solenoid valves
the screw for the oil temperature sensor holder. Remove the sensor from the control system
the cable harness from the holders on the control system.

Push the cable harness to one side.