LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Transmission - Removal, Replacement And Installation - 2 Of 2) >> Transmission, Automatic (Ambulance; 2001-2002) >> Sealing ring, gear shift linkage rod, replacing >> Checking and adjusting the gear-shift position sensor >> Installing the cable duct

Installing the cable duct

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Gear-Shift Position Sensor
GLL109388Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the cable duct on the screw. Tighten to 25 Nm  .

Install the lever on the control shaft. Tighten to 16 Nm  .

scientia non olet · About LEMON Manuals