Install the locating pins in the brake caliper

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Retaining Spring & Locating Pins

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the rubber sleeves of the locating pins. Replace if necessary.

Insert the locating pins in the rubber sleeves.

Tighten the locating pins. Tighten to 30 Nm . Install the protective caps (1).

Install the retaining spring (3).