LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Wheel Brake - Cleaning, Inspection And Adjustment) >> Mechanical Checks And Adjustments (1999-2006) >> Rear wheel hub, measuring lateral runout >> Install the bracket included in the test equipment

Install the bracket included in the test equipment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bracket On Mounting Hole For Brake Caliper
GLL104463Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the bracket on the mounting hole for the brake caliper. Use the M8 screws and nuts included in the kit: 9995507 .

NOTE: The lower nut is specially manufactured and should be located in the bracket.
Fig 2: Dial Gauge In Bracket
GLL104459Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the dial gauge in the bracket as shown.

scientia non olet · About LEMON Manuals