Finishing work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For tightening torques, see Tightening torque .

Fig 1: Brake Disc And Caliper Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the test equipment

Install:

the brake disc
the 1 M6 screw
the brake caliper and the caliper holder.

Tighten. See Tightening torque .

NOTE: Use new mounting screws.

Install the wheel

See Installing wheels .