Brake disc rear, replacing: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For tightening torques, see: Tightening torque .

Installing the brake disc and caliper holder

Fig 1: Brake Disc And Caliper Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the brake disc.

NOTE: Be careful when handling the new brake disc. Careless handling can cause damage to the brake disc (out-of-true).

Install:

the new brake disc. Tighten the locating pin. Tighten. See Tightening torque
the brake caliper and the caliper holder. Use 2 new mounting screws. Tighten. See Tightening torque .