Measure the lateral run out
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Put the dial gauge point against the brake disc as shown.
Turn the brake disc. Use a socket wrench to help.
Note the dial gauge run-out. Brake disc lateral run-out must not exceed 0.040 mm.
If lateral run-out exceeds the value, replace the brake disc.
To replace the brake disc, see Replacing front brake discs .