Install the bracket included in the test equipment
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install the bracket for the brake caliper's upper mounting hole first.
Press the bracket against the constant velocity joint.
Then install the lower mounting screw in the brake caliper's lower mounting hole. Clamp the bracket on one side using the flange on the screw.
Use the M12 screws and nuts included in kit 9995507 .