Cylinder Head
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA. Maximum out-of-true
| Front-rear........0.50 mm |
| Lateral........0.20 mm |
| Cylinder head height, new cylinder head........129.0 0.05 |
| Maximum machining........0.30 mm |
CAUTION:
Scratches and corrosion on the cylinder head gasket face against the cylinder block must only be machined on a flat cylinder head.