Installing The Front Camshaft Seal: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The purpose of the section, "Installing the variable valve timing unit/timing gear pulley", described here is to ensure that the variable valve timing unit is correctly positioned but also to reset the camshaft timing gear pulley to the correct position using the markings made at the factory. This is to ensure that the conditions are correct for any later fault-tracing.
NOTE:
For tightening torques, see: Tightening torque .