Removing/Installing The Rear Camshaft Seal: Preparation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Trigger Wheel, Camshaft Position (CMP) Sensor Housing, Air Cleaner (ACL) Cover, Intake Manifold Between Electronic Throttle Module (ETM) & Engine Stabilizer Brace
Remove:
- the intake manifold between the electronic throttle module (ETM) and air cleaner (ACL) cover
- the air cleaner (ACL) cover. Place it to one side
- the camshaft position (CMP) sensor housing and the trigger wheel.