Separating The Steering Shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Screw For Joint Between Steering Gear And Steering Shaft

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the ignition key.

Remove the screw from the joint between the steering gear and the steering shaft.

Fig 2: Identifying Length Of Track Rod In Relation To Steering Gear Housing

Courtesy of VOLVO CARS OF NORTH AMERICA.

On one side, measure the length of the track rod in relation to the steering gear housing. Note the measurement.

Press up the joint from the steering gear.

CAUTION:

The steering shaft must not be turned. The contact reel in the SRS system could be damaged.