LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine - Removal, Replacement And Installation) >> Transmission (B5254T2; 2004-2006) >> Engine/Transmission, Installing >> Transmission, Installation >> Tightening The Ball Joint Pinion

Tightening The Ball Joint Pinion

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Ball Joint Nut
GLL109805Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Counterhold the ball joint pinion while tightening so that the ball joint boot cannot turn. Tighten. See: Tightening torque .

For steel control arm, see:

scientia non olet · About LEMON Manuals