Installing The Screws For The Transmission And Engine

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lower the vehicle

Remove the lifting beam from the engine.

Install:

the remaining screws for the transmission and starter motor
the 2 screws for the starter motor. Tighten
the screw for the ignition position sensor. Tighten.