Installing The Right-Hand Drive Shaft To The Gearbox, Wheel Spindle And Link Arm

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Right-Hand Drive Shaft & Gearbox

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Take care not to damage the drive shaft seal in the transmission.

Install the pilot bearing cover for the drive shaft

Tighten.

Align the drive shaft in the wheel housing.

Install:

the screw loosely in the drive shaft.
the wheel spindle on the control arm
the lock nut loosely.

Press the evaporator cable and the oil pipe into place in the sub-frame clips.