Installing The Bevel Gear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bevel Gear Hung Up With A Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Bevel Gear Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the tie strap.

Install the bevel gear.

Align the propeller shaft on the bevel gear and rotate the bevel gear into position. Install new screws. Tighten the screws crosswise lightly.

Tighten. Tightening torque .