Installing And Tightening Screws For The Transmission

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install all 7 screws securing the transmission to the engine.

First tighten alternately and crosswise to light contact.

At the same time, check that the whole of the transmission is in contact with the engine.

Then tighten the M10 transmission / engine screws crosswise.

Remove the fixture from the transmission.

Lower the vehicle