Fitting The Sub-Frame To The Body
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use new screws (4 x M14). Lubricate the screw threads. Make sure that the screws for the steering gear locate in the sub-frame.
Start on the left-hand side.
Raise the subframe with the mobile jack 9985972 .
Locate the steering gear screws in the subframe.
Install the subframe and support bracket screws, start on the left-hand side followed by the right. Tighten as per Tightening torque .
Move the mobile jack to the right-hand side. Remove the existing screws and repeat the operation.