Installing The Starter Motor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install:

the starter motor. Tighten screws at gearbox. Tighten. See Tightening torque
the screw at the support bracket for the starter motor. Tighten.
NOTE:
The support bracket is withdrawn during model year 2002.
the trigger wheels. Tighten the screws
the camshaft position (CMP) sensor housings. Tighten the screws
the intake pipe between the charge air cooler (CAC) and the electronic throttle module (ETM).