LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine - Removal, Replacement And Installation) >> Timing Gear (B6294T; 2002-2006) >> Camshaft Seal / Variable Valve Timing (VVT) Unit, Replacing >> Installing The Front Camshaft Seal >> Installing The Front Camshaft Seal

Installing The Front Camshaft Seal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drift 999 5718
GLL102792Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the surface of the seal that the camshaft rotates against. Install the camshaft seal. Use drift 9995718 . Use the mounting screw for the variable valve timing unit. Tighten until the drift bottoms out.

scientia non olet · About LEMON Manuals