Applies to B5244Sx model years 1999-2001
A modified VVT-solenoid is now available as spare part for B5244Sx model years 1999-2001 . This means that the connector on the cable must be replaced. Note the position of the electric connections. Cut the cables next to the connector.
Note the position of the electric connections.
Cut the cables next to the connector.
Press up the lock tab and pull out the seat for the connector pins from the casing.
Remove the lock
Make sure that the connector pins end up in the correct position.
Install the connector pins in the seat so that the locks on the pin end up in the opening on the side of the seat.
Install the catch.
Install the casing.
Splice the cables. Joining the cables
Make sure that the cable cannot enter the timing gears by clamping any excess cable with cable ties.