Replacing The Rear Seal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
The following components must be removed when replacing the rear seal:
- the cross stay between the suspension turrets
- the air hose from the air cleaner (ACL) to the turbocharger (TC). Place to one side. Seal the openings
- place the air cleaner (ACL) cover to one side
- the charge air pipe over the engine. Seal the openings
- the cover over the ignition coils
- the upper torque rod bracket
- the camshaft position sensor (CMP) housing and trigger wheel.