Installing The Screws For The Engine Mounting To The Engine

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Right-Hand Engine Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall the screws holding the engine mounting to the engine. Tighten to 35 Nm . Angle-tighten 90° .

NOTE:

Use new screws.