Installing The Starter Motor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the starter motor. Tighten screws at gearbox. Tighten. See Tightening torque
- the screw at the support bracket for the starter motor. TightenNOTE:
Note The support bracket is withdrawn during model year 2002.
- the trigger wheel. Tighten the screw
- the camshaft position (CMP) sensor housing. Tighten the screws
- a new cover at the rear edge of the camshaft.