Installing The Front Camshaft Seal: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install the auxiliaries belt around the pulley on the crankshaft.

Install:

the plastic nuts for the cover in the right-hand wing liner
the right front wheel. See Installing wheels .

Fig 1: Expansion Tank And Servo Reservoir

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

front timing cover. Tension the auxiliaries belt. Check that it is correctly positioned on all pulleys
the expansion tank
the hose between the expansion tank and the radiator. Remove the lock grip pliers
the servo reservoir
the upper timing cover.

Fig 2: Engine Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the engine stabilizer brace. Tighten the screws
the screw holding the engine stabilizer brace to the bracket on the engine. Tighten
the battery negative lead. Also read Battery, disconnecting .