Releasing The Inlet Pipe For The Coolant Pump
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the screw that holds the inlet pipe for the coolant pump to the cylinder block
- the two screws at the connection between the coolant pipe and the bypass channel.
Carefully turn the pipe to remove it from the cylinder block.