Removing The Timing Gear Pulley

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Adjustment Tool 999 5452 At Rear Of Camshafts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install tool 9995452 at the rear of the camshafts.

Remove

the variable valve timing unit center plug.
variable valve timing unit center screw.
Pull / pry off the variable valve timing unit and timing belt pulley.
screws holding the timing belt (without the variable valve timing unit) to the camshaft.
the timing belt pulley.
tool 999 5452.