Removing Components From Turbo 2

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Torque Rod Bracket, Upper Screw Securing Automatic Transmission Dipstick Pipe To Engine & Ground Leads

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove from turbo 2

the heat deflector plate.
the ground strips between the engine and the firewall.
the upper screw of the automatic transmission dipstick tube.
Loosen the lower.
the torque arm bracket.
intake and charge air pipes, plug the openings.
the hose from the pressure regulator.
the clamp between the coolant pump inlet pipe and the turbocharger oil pressure pipe.