Removing Components From Turbo 1

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake And Charge Air Pipes

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove from turbo 1

the ground strips between the engine and the firewall.
intake and charge air pipes, plug the openings.
the heat deflector plate.
the pipe screw for the oil pressure pipe.
the oil pressure pipe.
the pipe screws for the coolant pipes.
NOTE:
Place a container underneath for the coolant.
the upper coolant pipe with hose.