Removing The Cylinder Head Gasket: Preparation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Negative Lead, Radiator Breather Tube By Expansion Tank, Right-Hand Drive Shaft, Bearing Seat & Pipe Screw
The terms turbo 1 and turbo 2 are used to simplify the text below. Turbo 1 stands for the turbocharger for cylinders 1, 2 and 3. Turbo 2 stands for the turbocharger for cylinders 4, 5 and 6.
Remove
- the negative battery cable. First read Battery, disconnecting .
- the radiator breather tube by the expansion tank. Install lock grip pliers.
- the right drive shaft. See: Drive shaft right, replacing .
- the bearing seat for the drive shaft from the cylinder block.
- the pipe screw for the turbocharger oil pressure pipe by the cylinder block.