Installing The Manifold/Turbo 2

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Return Line

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install new gaskets.

Lubricate the studs at the exhaust ports and at the flange on the turbocharger exhaust bend with paste 116 1408.

Lower and install the manifold/turbocharger.

Install

washers and new nuts that hold the manifold to the cylinder head.
the pipe screw holding the oil pressure pipe to the turbocharger. Use new sealing washers. Do not tighten.