Removing The Timing Gear Pulley

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cable duct from its mountings on the right-hand suspension turret.

NOTE:

Do not damage the paintwork.

Hold the cable duct out of the way and remove:

the plug at the front of the variable valve timing unit (TX55).
NOTE:
Use paper or similar to absorb oil that drains.
the center screw in the variable valve timing unit (TX55).

Carefully pull out the timing gear pulley with the variable valve timing (VVT) unit.

Remove tool 9995452 .