Removing Ignition Coils
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Mark up the ignition coils so that their original positions can be established
- Remove the mounting screws for the ignition coils and the screws at the two ground terminals
- Disconnect the connector for the variable valve timing solenoid
- Lift up and place the ignition coils and wiring to one side.
Remove:
- the crankcase ventilation hose from the top of the camshaft cover
- the camshaft position sensor (CMP) housing and trigger wheel.