Installing The Front Camshaft Seals
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Use drift 9995718 .
- Lubricate the surface of the seal that the camshaft rotates against.
- Use the variable valve timing unit / timing belt pulley mounting screws. Tighten the screws until the drift bottoms out
- Remove the drift
- Install the screw holding the inner timing cover to the cylinder head.