Installing the camshaft press

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Turned Until Stopped Against Camshaft Press

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the lower section of the camshaft press 9995765 at the inlet valves for cylinder 1.

Tighten the tool against the cylinder head. Tighten to 17 Nm .

Turn the camshaft until it stops against the camshaft press.

Fig 2: Identifying Camshaft Tightening Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper section of the camshaft press.

Tighten the screw which tensions the camshaft. Tighten to 12 Nm .