LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine - Cleaning, Inspection And Adjustment) >> Transmission (B6304S3; 1999) >> Variable Valve Timing Unit, Checking And Adjusting >> Installing And Adjusting The Variable Valve Timing Unit/Gear Pulley On The Camshafts. >> Installing The Crankshaft Adjustment Tool

Installing The Crankshaft Adjustment Tool

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Remove the starter motor mounting screws. Pull out the starter motor and put it aside.

Remove the blind cover plug from the hole for the adjustment tool.

Turn the crankshaft clockwise  slightly.

Install: 9995451 . Ensure that the tool bottoms out against the cylinder block.

scientia non olet · About LEMON Manuals