LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine - Cleaning, Inspection And Adjustment) >> Cylinder Head (B5254T2; 2004) >> Cylinder Leakage Test >> General Method Description >> The Cylinders Can Be Checked For Leakage As An Alternative To A Compression Test

The Cylinders Can Be Checked For Leakage As An Alternative To A Compression Test

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Compression Gauge In Cylinder
GLL100861Courtesy of VOLVO CARS OF NORTH AMERICA.

Using this method, the amount of leakage at the engine cylinders is measured and it is possible to locate the source of any leaks.

A similar check can be performed using a compression gauge by injecting oil in the cylinder. However, this can cause a buildup of carbon deposits

The result will not always be decisive or precise.

In addition, the VIDA station or the Volvo System Tester (VST) must always be connected afterwards to erase any diagnostic trouble codes (DTCs).