Installing Components
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the connector for the heated oxygen sensor (HO2S) (turbocharger (TC) 2)
- the intake and charge air pipes
- the hose from the pressure regulator to the T piece (turbocharger (TC) 2)
- the plastic charge air pipe
- the plastic intake pipe
- the connector for the heated oxygen sensor (HO2S) (turbocharger (TC) 1). Clamp the wiring for the heated oxygen sensors (HO2S)
- the screw for the engine stabilizer brace mounting on the engine
- the cross stay between the suspension turrets
- the expansion tank cap.