Removing The Drive Shaft From The Wheel Hub

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wheel Knuckle, Special Tools 999 7076 And 999 5562

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fold down the control arm. Use lever 9997076 to move the wheel spindle to the side. At the same time, install protective sleeve 9995562 on the ball joint pinion. Hold the sleeve in place using the nut for the ball joint.